Packed on pallets,
Hobus tiles are
protected during
shipping and handling,
facilitating the work of
the applicator.
Water absorptionThe maximum permissible limit is 20%.
Straightness and flatnessThe value of straightness shall not exceed 1% of the effective length and effective width. The value of flatness should not exceed 5mm.
Tensile strength to strengthThe breaking loads of flexion should not be less than 130kgf nor 1300n.
Dimensional toleranceThe tolerance allowed is 2.0% for the manufacturing dimensions (width and length).
MassThe mass of the dry tile should not exceed 6% of the value declared in the tile design.
Resistance to water penetrationWhen subjected to testing to verify the waterproofing, the tile must not have leaks or drops forming on its underside, however, the appearance of moisture stains are tolerable.
Note: There may be formation of drops by condensation at the bottom of the tile.
= ABNT Brazilian Association of Technical Standards.
Ricardo Hobus Street, No. 395, Centro - Agrolândia - SC - State: 88420-000Copyright © 2012 - Telhas Hobus - Área Local